Product family

Products

Process software, monitoring system and measurement hardware. Built by one team, joined on one platform.

BIOSECURE

A single platform for cell and tissue manufacturing, biobanking, transplant and cord blood processes — from patient and donor registration through processing…

Ürün Toplama adımı: toplama süresi/hacim bilgileri ve kendi ürün, SKT, hacim alanlarıyla Torba 1

Available

BIOSECURE ISBT & Monitoring

Process management for haematopoietic transplant and apheresis units: diagnosis and donor workup, cell order, collection, processing, cryopreservation…

BIOSECURE storage locations: on the left, a tree under the main centre with an apheresis section, a −86 freezer, a +4 cabinet and a tank; each row carries an occupancy bar that aggregates upward. On the right, the selected Matrix Rack 4×4 with its address, barcode and 16-position layout grid, occupied positions shaded; below it the selected product's volume, expiry and cell count values

Available

BIOSECURE Biobank

Sample mapping and barcoding for biobanks and research laboratories: tank, rack, box and position addressing, cryogenic labeling, chain of custody and storage…

Hasta/donör kaydından kriyo bankalamaya ürün yaşam döngüsü (yapay zekâ konsept görseli)

Available

BIOSECURE Cord Blood

Cord blood bank process management: collection and transport, the processing window, maternal and unit testing, cryopreservation, tank mapping, quarantine and…

Tam üretim süreci ağacı: tedarik → izolasyon → ekim → idame → kriyo → ürünleştirme

Available

BIOSECURE HDBO — GMP manufacturing

Electronic batch records for GMP cell and tissue manufacturing: product-specific process design, in-process quality gates, consumable and equipment linkage…

Saklama Ürün Listesi: SEC sütunu, ürün, hacim, toplama tarihi, SKT ve yerleşim

Available

BIOSECURE SEC

Single European Code generation, labeling and end-to-end traceability. BIOSECURE builds the 40-character code from the ISBT 128 record rather than storing it…

BIOSECURE environmental monitoring dashboard: four device cards in the GMP Lab group — LN2 tank at −175.74 °C, ultra-low freezer at −73.69 °C, incubator humidity at 71.91% and incubator temperature at 34 °C; the selected device's temperature trend is shown on the right

Available

GE-MON

Central monitoring and alarm management for critical equipment and environments: ULT freezers, cryogenic tanks, incubators, cleanrooms and infrastructure, with…

Available

GE-100 MultiSensor

A single unit measuring oxygen, carbon dioxide, differential pressure, temperature and humidity, with local visual and audible alarms and relay outputs for…

Available

GE-202

IoT module for temperature, humidity and alarm contact monitoring, with WiFi, Ethernet and RS485, MQTT and Modbus support, and local buffering when the network…

Available

GE-EDGE

An edge gateway that collects data from equipment of different makes and protocols, pre-processes it locally and delivers it securely over MQTT, Modbus and OPC…

Pilot

GE-SCAN

Reads all coded vials in a cryogenic box in a single capture inside a closed enclosure and reconciles them against the expected layout in the sample database.

Cryogenic area layout diagram: bulk and reserve nitrogen tanks outside, the supply line, and the cryogenic tank group, controlled-rate freezer and sample preparation cabinet in the laboratory

Available

CryoCap

Level and temperature monitoring for cryogenic tanks, designed to be retrofitted to tanks already in service.

Products in development

Work running under R&D projects is grouped separately.

Which product answers which requirement?

Tell us about your processes and equipment park and we will work out the scope together.

Request a demo