TRManufacturing facility and product roadmap
Since 2026 we have been building our boards on our own SMT line at Teknopark İstanbul. Design, firmware, manufacturing and test all happen in the same building.
Roadmap
A faulty board is not shipped abroad. The team that designed it is in the same building, so turnaround drops to weeks, and spare parts and calibration stay in Türkiye.
What this means for you: when a device fails, the wait depends on our schedule, not on a supplier's country.
Manufacturing infrastructure
The line was set up under the KOSGEB Technology Investment programme and went live in 2026.
| Area | Detail |
|---|---|
| Line | SMT placement machine, reflow oven, feeders and conveyor, compressor, soldering stations, oscilloscope and test equipment; 57 m² of production space at Teknopark İstanbul |
| Capacity plan | 40–50 devices (2026) → 80–100 (2027) → 150+ (2028) |
| Quality | ISO 9001 / 27001 / 45001 certified processes; GE-100 CE test report; calibration certificate and serial number traceability for every device |
Roadmap products
The GE-100's two-board architecture — a shared upper board (processor, display, communication) and a product-specific lower board (I/O, sensors, relays) — lets new devices be derived quickly. The following are being developed on that platform.
| Product | What it does | Status |
|---|---|---|
| GMP temperature monitor | Multi-point temperature recording and alarms | In development |
| Cold chain tracker | Temperature and location recording in transit; shares GNSS and battery design with CryoCap | In development |
| LN2 tank level and control unit | Level, temperature and fill solenoid control; a domestic alternative to imported controllers | Monitoring ready, control in development |
| Controlled-rate freezer controller | Domestic control board and software for controlled-rate freezers | Prototype |
| Handheld logger with display | Battery-powered data logger with a screen | Concept |
| RFID tracker | RFID tracking for samples and boxes | Concept |
| General purpose control unit | Control and I/O modules for automation such as HVAC, dampers and filling | Concept |
How we develop
From requirements to series production: schematic and PCB design, prototype and 3D-printed mechanics, firmware, mechanical and field testing, CE testing. The software side shares the same data contract as BIOSECURE, so each new device is added to the monitoring platform by configuration rather than as a separate integration project.
Joint development and OEM manufacturing
If you would like to discuss joint development or OEM manufacturing for your own device, let us arrange a call.